Description
Features
Reviews
Wall and ceiling lights for indoor and outdoor areas, consisting of: Housing made of technopolymer, diffuser made of matt, shatter-proof technopolymer, glow wire 960 °C, protection class II, silicone seal, light prepared for through-wiring, locking screws made of non-destructive stainless steel, cable glands also possible for cable diameters up to max. 20 mm diameter, pivoting SMD LED board on MCPCB basis (metal circuit board): FUTURE-PROOF, built-in high frequency sensor (HF) with continuous operation at a frequency of 5.8 GHz +/- 75 MHz, the SMART HF version is fully equipped with a built-in high frequency sensor that increases to 30%-100% of the luminous flux when people are detected
| Property | Value |
| Suitable for wall mounting: | No |
| Suitable for pendant suspension: | No |
| Suitable for ceiling mounting: | No |
| Suitable for recessed mounting: | No |
| Suitable for surface mounting: | Yes |
| Light source: | LED not replaceable |
| With light source: | Yes |
| Socket: | other |
| Suitable for Number of bulbs: | 1 |
| Lamp wattage: | 16 W |
| Lamp wattage at Multiwatt: | not applicable |
| Operating device: | LED operating device, current-controlled |
| With operating device: | Yes |
| Type of dimming: | not dimmable |
| Circuit: | other |
| Suitable for emergency lighting: | No |
| Emergency lighting component integrated: | No |
| Nominal voltage: | 220 - 240 V |
| Color temperature: | 4000 - 4000 K |
| Housing material: | plastic |
| Surface finish: | matt |
| Housing color: | white |
| Suitable for light strip configuration: | No |
| Cover material: | plastic opal |
| Suitable for computer workstations: | No |
| Design of the grid: | without |
| Reflector: | other |
| Light distribution: | symmetrical |
| Beam angle: | free-beaming |
| Light emission: | direct |
| Height/depth: | 84.5 mm |
| Outer diameter: | 320 mm |
| With motion detector: | Yes |
| With light sensor: | No |
| Protection class: | II |
| Protection type (IP): | IP65 |
| Impact resistance: | IK10 |
| Fire protection 'D': | No |
| Installation in insulated ceilings, fire protection 'F with roof': | No |
| Ambient temperature: | -10 - 30 °C |
| Glow wire test according to IEC 60695-2-10: | without |
| With air slots: | No |
| Voltage type: | AC |
| Effective luminous flux: | 1292 lm |
| Light color: | white |
| Color rendering index CRI: | 80-89 |
Features
HAB
304207
Manufacturer
HAN
304207
GTIN
8018367631678
Surface finish
Frosted
Execution of the grid
Without
Beam angle
Free-radiating
Outer diameter
320 mm
Operating device
LED control gear current controlled
Color temperature
4000 - 4000K
Color rendering index CRI
80-89
Version
Other
Suitable for surface mounting
Yes
Suitable for ceiling mounting
No
Suitable for flush mounting
No
Suitable for number of lamps
1
Suitable for light strip configuration
No
Suitable for emergency lighting
No
Suitable for pendulum suspension
No
Suitable for wall mounting
No
Housing color
White
Height/Depth
84.5 mm
Lamp power
16W
Lamps
LED not replaceable
Light emission
Direct
Light color
White
Light distribution
Symmetrical
With operating device
Yes
With motion detector
Yes
With light source
Yes
With light sensor
No
With air slots
No
Nominal voltage
220 - 240V
Reflector
Other
Impact resistance
IK10
Protection class
II
Voltage type
AC
Ambient temperature
-10 - 30 °C
Cover material
Plastic opal
Housing material
Plastic
No reviews yet — your comment may be first.
All reviews 0
