LED street lights, available in two versions: Body and cover in die-cast aluminium painted with polyester powder coating, after a chemical transformation. Diffuser in extra-clear tempered flat safety glass. Optics in technopolymer lenses with high light transmission. Depending on the model, the following optics are available: SR/T1 for narrow streets and with a W/H ratio (road width / pole height) of up to 0.75 SR/T2 for two-lane roads with a W/H ratio of 1 SR/T3 for wide streets with a W/H ratio of 1.25 SR/T4 for wide streets with a W/H ratio of 1.5. Heat sink in aluminium. Gasket in resistant silicone with high resilience. Terminal block ensures automatic power supply interruption when the light housing is opened. M25x1.5 gland for cables with D= 9-14 mm. High-performance electronic ballast. Complies with UNI 10819 and regional laws on light pollution. Stainless steel external screws. Bracket housing the components in technopolymer reinforced with glass fibre. Pole fixing bracket in painted die-cast aluminium. The KYRO+ 1 versions are suitable for installation on poles with D=42-60/62 mm, the KYRO+ 1-D76 versions on poles with D=76 mm and the KYRO+ 2 versions on poles with D=60/62-76 mm. Component supports can be replaced without tools. Complete with additional protection against mains overvoltages up to 10 kV (DM). SECURE LIGHT DISTRIBUTION system that guarantees uniform light distribution even in the event of a fault in an LED. Versions with automatic power reduction are available. Versions with ON-OFF driver and dimmable DALI are available. The DALI version is supplied complete with 1 meter of cable H07RN-F 2x 1.5qmm and an IP66 connector made of polyamide with silver-plated brass contacts for cables D= 9-14 mm. This allows connection to the power grid, o
Property | Value |
Length: | 835 mm |
Width: | 330 mm |
Height/Depth: | 155 mm |
Suitable for number of light sources: | 1 |
System power: | 105 W |
Luminous flux: | 13469 lm |
Color temperature: | 4000 K |
Spigot size: | 60 to 78 mm |
Nominal voltage: | 220 to 240 V |
Housing color: | anthracite |
Operating device: | LED operating device, current-controlled |
With light source: | yes |
Light source: | LED not replaceable |
Socket: | without |
Protection class (IP): | IP66 |
Protection class: | II |
Impact resistance: | IK08 |
Mounting type: | Attachment |
Color rendering index CRI: | 70-79 |
Voltage type: | AC |
With operating device: | yes |
Adjustable optics: | no |
Cover material: | Glass transparent |
Material of the housing: | Aluminum |
Remote control: | without |
Constant luminous flux control: | no |
Light color: | white |
With connection cable: | no |
With radio control: | no |
With program-controlled light control: | no |
Dimming 0-10 V: | no |
Dimming 1-10 V: | no |
Dimming DALI: | no |
Dimming DMX: | no |
Dimming DSI: | d>no|
Dimming potentiometer (device integrated): | no |
Dimming LineSwitch: | no |
Dimming manufacturer-specific: | no |
Dimming Mains voltage modulation: | no |
Dimming trailing edge: | no |
Dimming leading edge: | no |
Dimming programmable: | no |
Dimming RF: | no |
Dimming Sine Wave Reduction: | no |
Dimming Touch and Dim: | no |
Dimming Zigbee: | no |
Dimming with push button: | no |
Without dimming function: | yes |
Light distributor: | Diffuser lens/optics/panel |
Luminaire with limited surface temperature D-mark according to EN 60598-2-24: | no |
Rated ambient temperature according to IEC 62722-2-1: | -40 to 40 °C |
Suitable for lamp power: | 105 W |
Power factor: | 0.9 |
Type of wiring: | Termination |
Number of poles: | 2 |
Conductor cross-section: | 2.5 mm² |
Connection type: | screw terminal |
Replaceable operating device: | yes |
Color consistency (McAdam ellipse): | SDCM3 |
Luminous flux maintenance at avg. Service life 50,000 h at 25 °C ambient temperature: | 96.2 % |
Luminous flux maintenance at average service life 100,000 h at 25 °C ambient temperature: | 94 % |
Compatible with Apple HomeKit: | no |
Compatible with Google Assistant: | no |
Compatible with Amazon Alexa: | no |
IFTTT support available: | no |