TECHNIVOLT 100
11 kW charging station with integrated charging socket according to IEC 62196-2 Type 2
For private charging at home
The TECHNIVOLT 100 makes fast and safe charging at home possible. In contrast, charging at a conventional socket not only involves significantly longer charging times, but also a high safety risk. In addition, having your own wallbox at home offers you another major advantage over public charging stations: you can choose your electricity provider and therefore the electricity price for charging your electric car.
The installation options for the TECHNIVOLT 100 are as numerous as its advantages. It can be installed under the carport, in the garage or underground car park and even in the driveway - anywhere you usually park your electric car. For those who do not want to or are not allowed to damage the structural integrity of a wall (third-party property), installation on a column with the TECHNIVOLT 100 is also possible.
Fast charging with 11 kW
With the charging power of 11 kW, you can also charge an electric vehicle with a larger battery capacity quickly and effectively. Use the simplified charging calculator to see how long it takes the TECHNIVOLT 100 to fully charge your vehicle from 0 to 100. The times determined are theoretical, maximum charging times. The common recommendation is to charge an electric car with a remaining battery capacity of around 20% to around 80% of the total battery capacity.
Protected by RFID card
If the e-charging station is freely accessible in the driveway or carport, access protection is a good idea to prevent unauthorized persons from charging. You can register up to 20 user cards on the TECHNIVOLT 100 using the master card supplied. Two user RFID cards are already included in the delivery to enable convenient and secure charging only after prior authorization. You can program any additional RFID cards as user cards at any time.
Lower installation costs thanks to integrated DC residual current detection
Now it gets very technical, but also important! The TECHNIVOLT 100 already has integrated electronic detection of smooth DC residual currents in the range of In &ge, 6 mA, as prescribed by DIN EN 61851-1 for electric vehicles. It ensures that the vehicle's power supply is disconnected in the event of a DC residual current greater than 6 mA. This means for the electrician who connects the wallbox: All he needs is a type A residual current circuit breaker, which is significantly cheaper than a type B switch.
Protected against wind and weather
The flexible use of the TECHNIVOLT 100 is not least due to the nature of its housing. As it is suitable for outdoor installation, this wallbox is well and safely encapsulated on the outside. However, a wallbox is also exposed to other external influences, not just pure rainwater. Dust or even unauthorized handling can lead to a reduction in the charging performance or damage to the wallbox. The TECHNIVOLT 100 therefore has protection class IP54. This means that it is well protected against dust, unwanted contact and splash water. This protection class is particularly important because otherwise better weather protection would have to be provided, which in turn causes additional costs. The TECHNIVOLT 100 includes weather protection.
Important functions at a glance
Type 2 charging plug
IP54 suitable for outdoors
Fast 3-phase charging
DC residual current protection
For private charging at home
Eligible for KfW funding
Protected by RFID card
Only subject to registration
Type 2 charging plug
The TECHNIVOLT 100 uses the Type 2 charging plug, which is widespread in Europe and is now considered the standard. Depending on which Mode 3 charging cable (Type 2 to Type 2 or Type 2 to Type 1) you connect, you can charge either an electric vehicle with a Type 1 or Type 2 plug.
KfW funding
The TECHNIVOLT 100 is eligible for funding under the KfW's subsidy for charging stations for electric cars in residential buildings (440).
Only subject to registration
For the 11 kW TECHNIVOLT charging station, registration with the energy supplier is sufficient according to the guidelines.
Unlike charging stations with a higher charging capacity, such as wall boxes with 22 kW, approval is not required.
Technical data:
General
EAN 4019588064003
Color black
Item no. 0000/6400
Weight (box) 6.5 kg
Weight (device) 4.4 kg
Device (WxHxD) 31.50 x 46.00 x 13.50 cm
Box (WxHxD) 39.80 x 52.00 x 23.70 cm
Output/vehicle connection
Charging mode Mode 3, IEC61851-1
Charging connection Socket type 2, IEC-62196
Output voltage 230 / 400 V
Charging current 16 A per phase
Charging power 11 kW/h
Operating ambient conditions
IP class 54
Shock resistance IK10
Temperature -35 ... 55 °C (without direct sunlight)
Air humidity 5 ... 95 % (relative, no dew)
Operating altitude 4000 m above sea level
Ambient conditions Storage
Temperature -40 ... 80 °C
Air humidity 5 ... 95 % (relative, no dew)
Mechanical properties
Housing material Plastic, flame-retardant
Feedthrough for data cable M20, for 2 cables
Feedthrough for power cable M32, for cable 15-21 mm
Fuse
DC residual current detection RCM internal, In &ge, 6 mA
MCB in the input tripping characteristics C
RCCB in the input 4P-20A-30mA, type A
Authorization
RFID yes
Communication
User authorization RFID
Modbus yes
Power supply
Current type AC
Nominal voltage 230 / 400 V
Nominal current 16 A 3-phase
Nominal frequency 50 Hz
Power consumption standby 3.5 W
Mains cable max. 10 mm 15-21 mm
Scope of delivery
TECHNIVOLT 100 charging station
Assembly instructions
Operating instructions
Assembly template
Assembly accessories
1x master RFID card
2x user RFID card
| Property | Value |
| Height: | 46.00 mm |
| Width: | 31.50 mm |
| Depth: | 13.50 mm |
| Protection class (IP): | IP54 |
| Nominal connected load: | 11 kW |
| Article colour: | black |
