Bottom section BR 85x130, top section 80mm, traffic white. Bottom section of the electrical installation duct system, plastic duct according to DIN EN 50085-1 as a device installation duct with top section width 80 or 120 mm for the installation of commercially available devices with or without additional panels. With bottom perforation (drill tolerance compensation on all sides) for direct wall mounting and additional rectangular perforation for tool-free fastening of the duct using clip technology on brackets. With top section width 80 mm with front-locking, tool-free device installation for fastening devices and device installation boxes with quick fastening - additional C-profile as a device installation option as with all ducts with top section width 120 mm. Couplings for simple and precise duct installation, partition walls and cable retention clips available as accessories. Note: Sound and fire protection measures must be carried out professionally.
| Property | Value |
| Width: | 130 mm |
| Length: | 2000 mm |
| Depth: | 85 mm |
| RAL number: | 9016 |
| Material: | Plastic |
| Halogen-free: | no |
| Design rectangular: | yes |
| Number of top parts: | 1 |
| Top part width 1: | 80 mm |
| Symmetrical: | yes |
| Material quality: | Polyvinyl chloride (PVC) |
| Surface: | untreated |
| Rear wall design (inside): | continuous C-profile |
| With protective film: | yes |
| Number of plug-in Partition walls: | 1 |
| With channel connector: | yes |
| Mounting holes in the floor: | yes |
| Mounting type of upper parts: | internal |
| With cable retaining clip: | no |
| Usable cross-section: | 9940 mm² |
| Top parts supplied: | no |
