Front-locking parapet duct lower part, aluminum BRA 70x210mm, upper part 2x80mm, anodized. Duct lower part, two-compartment, for the electrical installation duct system. Parapet duct made of aluminum in accordance with DIN EN 50085-1 as a device installation duct. With fixed partition wall for system separation. With bottom perforation for direct wall mounting and additional rectangular perforation for tool-free fastening of the duct using clip technology on brackets. With C-profile for fastening devices, device installation boxes with quick fastening and partition walls. With upper part width 80 mm, front-locking device installation for tool-free assembly is also possible. Couplings for potential equalization and for simple and precise duct connection, partition walls and cable retention clips available as accessories. Note: Potential equalization, earthing, sound and fire protection measures must be carried out professionally.
| Property | Value |
| Width: | 210 mm |
| Length: | 2000 mm |
| Depth: | 68 mm |
| Material: | Aluminium |
| Halogen-free: | yes |
| Design rectangular: | yes |
| Number of Upper parts: | 2 |
| Upper part width 2: | 80 mm |
| Symmetrical: | yes |
| Material quality: | other |
| Surface: | anodized/anodized |
| Rear wall design (inside): | continuous C-profile |
| With protective film: | yes |
| Number of pluggable partitions: | 2 |
| With channel connector: | yes |
| Mounting holes in the base: | yes |
| Mounting type of upper parts: | internal |
| With cable retaining clip: | no |
| Usable cross-section: | 12060 mm² |
| Top parts included: | no |
