Sill duct lower part, front-locking, hfr BRH 65x210mm, upper part 2x80mm vw. Duct lower part for the electrical installation duct system. Siding duct made of halogen-free plastic in accordance with DIN EN 50085-1 as a device installation duct with an upper part width of 80 mm for the installation of commercially available devices without additional panels. Halogen-free plastic is flame-retardant and does not develop any corrosive fire gases in combination with moisture, e.g. fire-fighting water. This means that electronic devices and material assets are better protected. With base perforation (drill tolerance compensation on all sides) for direct wall mounting and additional rectangular perforation for tool-free fastening of the duct using clip technology on consoles. With front-locking, tool-free device installation for fastening devices and device installation boxes with quick fastening. Additional C-profile as device installation option. Couplings for simple and precise duct assembly, partition walls and cable retention clips available as accessories. Note: Sound and fire protection measures must be carried out professionally.
| Property | Value |
| Width: | 210 mm |
| Length: | 2000 mm |
| Depth: | 68 mm |
| RAL number: | 9016 |
| Material: | Plastic |
| Halogen-free: | yes |
| Design rectangular: | yes |
| Number of tops: | 2 |
| Top width 1: | 80 mm |
| Top width 2: | 80 mm |
| Symmetrical: | yes |
| Material quality: | other |
| Surface: | untreated |
| Rear wall design (inside): | continuous C-profile |
| With protective film: | yes |
| Number of pluggable partitions: | 2 |
| With channel connector: | yes |
| Mounting holes in the base: | yes |
| Mounting type of top parts: | internal |
| With cable retaining clip: | no |
| Usable cross-section: | 12480 mm² |
| Top parts supplied: | no |
