Telegärtner J00060B0069 Cat.7 VM8-8 with mounting rail adapter connection module

The VM 8-8 Cat.7A module is used as a connection/extension of commercially available shielded and unshielded twisted pair installation cables (Cat.5e/Cat.6/Cat.6A/Cat.7/Cat.7A) in the following applications: cable relocations, cable extensions, cable damage. When using the VM 8-8 Cat.7A module, the cable segments of a structured cabling do not need to be re-routed. This reduces the amount of modification and costs to a minimum. Depending on the connection module type, up to 12 incoming and 12 outgoing 8-core cables can be firmly connected to one another without significantly affecting the transmission properties and limiting the maximum link lengths. Performance features: Connection via LSA-Plus insulation displacement terminals on a common circuit board, color coding according to EIA/TIA 568A and B, connection of 4-pair shielded/unshielded installation and patch cables from AWG 27-22, wire pairs can be routed to the terminal while retaining the twisted pair, secure shield contact with screw terminals directly on the circuit board, variable cable feeds, cable strain relief using standard cable ties (VM 8-8 Cat.7A (ISO/IEC) ), tool-free attachment of the shielding hoods made of stainless steel (19' and AP version), surface-mounted (AP) version: incoming and outgoing cables from the same direction, surface-mounted, 19' and single version: incoming and outgoing cables offset by 180 degrees, grounding option directly on the circuit board (M4 screw), EMC-safe according to DIN EN 61000-6-1 and 61000-6-2, connection via LSA-Plus insulation displacement terminals on a common circuit board, color coding according to EIA/TIA 568A and B, connection of 4-pair shielded/unshielded installation and patch cables from AWG 27-22, wire pairs can be led to the terminal while retaining the pair twist, secure shield contact with screw terminals directly on the circuit board, variable cable feeds, cable strain relief