Description
Features
Reviews
Staircase light timer for distribution board installation, time sequence via synchronous motor drive, therefore maximum reliability and accuracy, time range 1-7 minutes, times can be read directly, adjustable in steps of 15 seconds to 15 seconds, always the same connection, as pre-selector switch for 3- and 4-wire connection, switch: continuous light-minute light, can be switched on again after approx. 30 seconds over the entire setting range, 230 V, 50 Hz, switching capacity: 16 A, 230 V~
| Property | Value |
| Width in division units: | 1 |
| Off delay: | 0.5 to 7 min |
| Function: | mechanical |
| Mounting type: | DIN rail |
| Control voltage 1: | 230 V |
| Rated switching current: | 16 A |
| Control voltage type 1: | AC |
| Surge function selectable: | no |
| Frequency of control voltage 1: | 50 Hz |
| Circuit type: | 3- and 4-wire circuit |
| Switch-off warning: | without |
| Follow-up switching: | can be switched on again |
| Type of supply voltage: | AC |
| Installation depth: | 60 mm |
| Max. switching current (cos phi = 0.6): | 10 A |
| Button glow lamp current: | 50 mA |
| Supply voltage: | 207 to 253 V |
| Max. incandescent lamp load: | 2300 W |
| Max. fluorescent lamp load: | 2300 VA |
| Max. fluorescent lamp load (duo circuit): | 2300 VA |
| Max. fluorescent lamp load (parallel compensated): | 1300 VA |
| Number of contacts as normally open: | 1 |
Features
Type of voltage of the supply voltage
AC
Supply voltage
207 to 253 V
Circuit type
3- and 4-wire circuit
Max. fluorescent lamp load
2300 VA
Manufacturer
HAN
0080002
GTIN
4003468010068
Number of contacts as normally open
1
Width in pitch units
1
Installation depth
60 mm
Function
Mechanically
Mounting type
DIN rail
Supply voltage
207 to 253 V
No reviews yet — your comment may be first.
All reviews 0
