Description
Features
Reviews
Design-oriented LED light 8.5 W, front light output (spot), with motion detector (PIR), high-quality housing made of anodized extruded aluminum profile, suitable for outdoor use, automatic lighting control depending on presence and brightness, detection angle 180° with a range of 10 m, functions teach-in, test, twilight switch, dimmable orientation light and self-calculating night interruption adjustable, adjustable via theSenda S and P remote control, via theSenda B and the theSenda Plug app or via potentiometer on the device, high protection class IP 55 for outdoor installation, easy installation with plug-in base, networkability via radio, extremely efficient due to high light output, long-lasting LEDs: 50,000 hours service life, manual control via interrupter button (ON duration 6 h)
| Property | Value |
| Max. System power: | 8.5 W |
| Rated luminous flux according to IEC 62722-2-1: | 760 lm |
| Housing color: | Aluminium |
| Housing material: | Aluminium |
| Protection class (IP): | IP55 |
| Socket: | without |
| Light source: | LED not replaceable |
| Protection class: | II |
| With light source: | yes |
| With operating device: | yes |
| Suitable for recessed mounting: | no |
| Length: | 65 mm |
| Width: | 126 mm |
| Height/depth: | 127 mm |
| With motion detector: | yes |
| Color temperature: | 3000 K |
| Nominal voltage: | 230 V |
| Beam angle: | wide beam 41-80° |
| Color rendering index CRI: | 80-89 |
| Suitable for ceiling mounting: | no |
| Light distribution: | symmetrical |
| Operating device: | not required |
| Impact resistance: | IK04 |
| Luminaire with limited surface temperature 'D-mark': | no |
| Reflector: | high gloss |
| Luminous flux: | 760 lm |
| Cover material: | transparent plastic |
| Covering of the lamp with thermal insulation material possible: | no |
| Voltage type: | AC |
| Light color: | white |
| Suitable for track mounting: | no |
| Adjustability: | not adjustable |
| Suitable for clamp mounting: | no |
| Suitable for pendulum suspension: | no |
| Suitable for platform/floor mounting: | no |
| Suitable for traverse mounting: | no |
| With light sensor: | no |
| Suitable for surface mounting: | yes |
| Suitable for cable system: | no |
| Surface: | powder-coated |
| Brushed surface: | yes |
| LED nominal current at constant current: | 0 to 10 mA |
| Dimming depending on the operating device: | no |
| Dimming 0-10 V: | no |
| Dimming 1-10 V: | no |
| Dimming DALI: | no |
| Dimming DMX: | no |
| Dimming DSI: | no |
| Dimming potentiometer (device integrated): | no |
| Dimming GPRS: | no |
| Dimming LineSwitch: | no |
| Dimming manufacturer-specific: | yes |
| Dimming mains voltage modulation: | no |
| Dimming Trailing edge: | no |
| Dimming leading edge: | no |
| Dimming programmable: | no |
| Dimming RF: | no |
| Dimming Sine Wave Reduction: | no |
| Dimming Touch and Dim: | no |
| Dimming Zigbee: | no |
| Dimming with push button: | no |
| Without dimming function: | no |
| Light distributor: | Reflector |
| Light emission: | direct/indirect |
| Total harmonic distortion (THD): | 27 |
| Protection class (NEMA): | 4 |
| Rated ambient temperature according to IEC62722-2-1: | -25 to 45 °C |
| Type of wiring: | Termination |
| Power factor: | 0.95 |
| Number of poles: | 4 |
| Conductor cross-section: | 2.5 mm² |
| Connectable conductor cross-section: | 0 to 2.5 mm² |
| Connection type: | Screw terminal |
| Luminaire luminous efficacy: | 93 lm/W |
| Glow wire test according to IEC 60695-2-11: | 650 °C - 30 s |
| Photobiological safety according to EN 62471: | RG0 |
| Colour consistency (McAdam ellipse): | SDCM6 |
Features
Total harmonic distortion (THD)
27
Connectable conductor cross-section
0 to 2.5 mm²
HAB
TheLeda DS AL 8.5 Watt aluminum
Manufacturer
HAN
1020901
GTIN
4003468101216
Covering the luminaire with thermal insulation material possible
No
Connection type
Screw terminal
Type of wiring
Diploma
Beam angle
Wide beam 41-80°
Rated luminous flux according to IEC 62722-2-1
760lm
Rated ambient temperature according to IEC62722-2-1
-25 to 45 °C
Operating device
Not required
Width
126 mm
Dimming 0-10 V
No
Dimming 1-10 V
No
Dimming DALI
No
Dimming DMX
No
Dimming DSI
No
Dimming GPRS
No
Dimming LineSwitch
No
Dimming mains voltage modulation
No
Dimming trailing edge
No
Dimming phase control
No
Dimming potentiometer (integrated)
No
Dimming RF
No
Dimming Sine Wave Reduction
No
Dimming Touch and Dim
No
Dimming Zigbee
No
Dimming depends on the control gear
No
Dimming manufacturer-specific
Yes
Dimming with push button
No
Dimming programmable
No
Color consistency (McAdam ellipse)
SDCM6
Color temperature
3000K
Color rendering index CRI
80-89
Version
Without
Suitable for surface mounting
Yes
Suitable for ceiling mounting
No
Suitable for flush mounting
No
Suitable for clamp mounting
No
Suitable for pendulum suspension
No
Suitable for podium/floor mounting
No
Suitable for rope system
No
Suitable for busbar mounting
No
Suitable for truss mounting
No
Housing color
Aluminum
Glow wire test according to IEC 60695-2-11
650 °C - 30 s
Height/Depth
127 mm
LED nominal current at constant current
0 to 10 mA
Power factor
0.95
Conductor cross-section
2.5 mm²
Luminaire with limited surface temperature D-mark
No
Luminaire luminous efficacy
93lm/W
Lamps
LED not replaceable
Light emission
Direct/indirect
Light color
White
Luminous flux
760lm
Light distributor
Reflector
Light distribution
Symmetrical
Length
65 mm
Max. system performance
8.5W
With operating device
Yes
With motion detector
Yes
With light source
Yes
With light sensor
No
Nominal voltage
230V
Surface
Powder coated
Brushed surface
Yes
Without dimming function
No
Photobiological safety according to EN 62471
RG0
Number of poles
4
Reflector
High gloss
Impact resistance
IK04
IP protection)
IP55
Protection class (NEMA)
4
Protection class
II
Voltage type
AC
Adjustability
Not adjustable
Cover material
Plastic transparent
Housing material
Aluminum
No reviews yet — your comment may be first.
All reviews 0
