LED emergency light for standby light with integrated single battery system, nominal operating time 3 hours. For damp rooms and covered outdoor areas, cold stores, industrial plants, operating rooms, escape tunnels, parking garages and all types of damp room areas. For ceiling, wall and suspended mounting. Mounting clips and triangle brackets for suspended mounting included in delivery. Theft-proof installation possible using an anti-theft device that must be ordered separately. At a mounting height of 4 m, the required emergency illuminance of 1 lx is achieved in a circular area with a radius of 4.8 m near the ground. Opal, light-diffusing PC cover for particularly even illumination. LED system consisting of 4 mid-power LEDs. With 2 status LEDs for operating and charge level display. Opal, light-diffusing PC cover for particularly even illumination. Rated luminous flux 400 lm, light color neutral white, correlated color temperature (CCT) 4000 K, luminaire body made of die-cast aluminum. Robust design with vibration-free components. Dimensions in mm (L x W x H): 403 x 94 x 95. Permissible ambient temperature (ta): 0 °C - +35 °C. With WIELAND type connection plug on the front. With electronic ballast, switchable. With integrated self-test and charging status display. Charging time for the Ni-MH battery (6 V, 1.6 Ah) when first used is 24 hours. The product meets the basic requirements of the applicable EU directives and the Product Safety Act and bears the CE marking.
| Property | Value |
| Max. System power: | 6 W |
| Rated luminous flux according to IEC 62722-2-1: | 400 lm |
| Suitable for number of lamps: | 1 |
| Length: | 403 mm |
| Width: | 94 mm |
| Height/depth: | 95 mm |
| Protection rating (IP): | IP66 |
| Protection class: | I |
| Luminaire with limited surface temperature 'D-mark': | no |
| Nominal voltage: | 230 V |
| Housing color: | anthracite |
| Housing material: | aluminum |
| Color temperature: | 4000 K |
| Impact resistance: | IK04 |
| Color rendering index CRI: | 80-89 |
| Suitable for Ceiling mounting: | yes |
| Suitable for wall mounting: | yes |
| Energy efficiency class of the permanently installed light source: | other |
| Voltage type: | AC/DC |
| With motion detector: | no |
| Beam angle: | free beam/diffuse |
| With light source: | yes |
| Light source: | LED not replaceable |
| Rated ambient temperature according to IEC62722-2-1: | 0 to 35 °C |
| Socket: | other |
| Connection type: | other |
| With operating device: | no |
| Cover material: | structured plastic |
| Light distributor: | focus lens |
| Without dimming function: | yes |
| Light emission: | direct/indirect |
| Light distribution: | symmetrical |
| With light sensor: | no |
| Operating device: | electronic transformer |
| Suitable for recessed mounting: | no |
| Light color: | white |
| Suitable for computer workstations in accordance with EN 12464-1: | no |
| Suitable for light strip configuration: | no |
| Suitable for Pendant suspension: | yes |
| Suitable for surface mounting: | yes |
| Suitable for emergency lighting: | yes |
| Design of the grid: | without |
| Covering of the lamp with thermal insulation material possible: | yes |
| Dimming DMX: | no |
| Dimming DSI: | no |
| With air slots: | no |
| Dimming LineSwitch: | no |
| Dimming potentiometer (device integrated): | no |
| Dimming 0-10 V: | no |
| Dimming GPRS: | no |
| Dimming 1-10 V: | no |
| Dimming manufacturer-specific: | no |
| Dimming DALI: | no |
| Dimming Mains voltage modulation: | no |
| Dimming trailing edge: | no |
| Dimming leading edge: | no |
| Dimming programmable: | no |
| Dimming RF: | no |
| Dimming Sine Wave Reduction: | no |
| Dimming Touch and Dim: | no |
| Dimming Zigbee: | no |
| Dimming with push button: | no |
| Dimming depending on operating device: | no |
| Protection class (NEMA): | other |
| Glow wire test according to IEC 60695-2-11: | 650 °C - 30 s |
| Luminaire luminous efficacy: | 67 lm/W |
| Power factor: | 0.9 |
| Type of wiring: | Termination |
| Number of poles: | 3 |
