LED wall light with indirect light distribution. For direct wall mounting. With indirect light distribution With translucent PMMA cover panel. Harmonious lighting effect thanks to evenly illuminated light output. Rated luminous flux 1900 lm, rated power 18.00 W, luminaire luminous efficacy 105 lm/W. Light color warm white, correlated color temperature (CCT) 3000 K, general color rendering index (CRI) Ra> 80. Color location tolerance (initial MacAdam) 3 SDCM, average rated service life L80(tq 25 °C) = 70,000 h, average rated service life L85(tq 25 °C) = 50,000 h. The light source is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). Luminaire body made of aluminum, upper cover made of sheet steel. Surface coated white (RAL 9016). Dimensions (L x W): 190 mm x 700 mm, luminaire height 96 mm. Permissible ambient temperature (ta): -20 °C - +25 °C. Protection class (EN 61140): I, protection type (DIN EN 60529): IP40, shock resistance level according to IEC 62262: IK06, test temperature glow wire test according to IEC 60695-2-11: 650 °C. Weight: 3.9 kg. With electronic control gear, digitally dimmable (DALI). Control gear according to DALI-2 standard (EN 62386). The control gear is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). The luminaire can be equipped with the Monitoring ready (MOR) functionality on request. The product meets the basic requirements of the applicable EU directives and the product safety law and bears the CE marking. In addition, the luminaire is ENEC-certified by an independent testing body.
Property | Value |
Max. System power: | 18 W |
Rated luminous flux according to IEC 62722-2-1: | 1900 lm |
Suitable for number of lamps: | 1 |
Length: | 190 mm |
Width: | 700 mm |
Height/depth: | 96 mm |
Protection rating (IP): | IP40 |
Protection class: | I |
Luminaire with limited surface temperature 'D-mark': | no |
Nominal voltage: | 220 to 240 V |
Housing color: | white |
Housing material: | aluminum |
Color temperature: | 3000 K |
Impact resistance: | IK06 |
Color rendering index CRI: | 80-89 |
Suitable for ceiling mounting: | no |
Suitable for wall mounting: | yes |
Energy efficiency class of the permanently installed light source: | other |
Voltage type: | AC |
With motion detector: | no |
With light source: | yes |
Light source: | LED not replaceable |
Rated ambient temperature according to IEC62722-2-1: | -20 to 25 °C |
Socket: | other |
Connection type: | plug-in terminal |
With operating device: | yes |
Light distributor: | diffuser lens/optics/panel |
Without dimming function: | no |
Light emission: | indirect |
Light distribution: | symmetrical |
With Light sensor: | no |
Operating device: | electronic transformer |
Suitable for built-in installation: | no |
Light color: | white |
Suitable for computer workstations in accordance with EN 12464-1: | no |
Suitable for light strip configuration: | no |
Suitable for pendulum suspension: | no |
Suitable for surface mounting: | no |
Suitable for emergency lighting: | no |
Design of the grid: | without |
Covering of the lamp with thermal insulation material possible: | yes |
DMX dimming: | no |
DSI dimming: | no |
LineSwitch dimming: | no |
Potentiometer dimming (integrated in the device): | no |
Dimming 0-10 V: | no |
Dimming GPRS: | no |
Dimming 1-10 V: | no |
Dimming manufacturer-specific: | no | >
Dimming DALI: | yes |
Dimming mains voltage modulation: | no |
Dimming phase edge: | no |
Dimming phase edge: | no |
Dimming programmable: | no |
Dimming RF: | no |
Dimming Sine Wave Reduction: | no |
Dimming Touch and Dim: | no |
Dimming Zigbee: | no |
Dimming with push button: | no |
Dimming dependent on operating device: | yes |
Rated service life L70/B50 at 25 °C: | 70000 h |
Protection class (NEMA): | other |
Glow wire test according to IEC 60695-2-11: | 650 °C - 30 s |
Luminaire luminous efficacy: | 106 lm/W |
Power factor: | 0.9 |
Number of poles: | 5 |