Recessed floor spotlight for accent lighting, can be walked on and driven over. For installation in the floor. A foundation with sufficient drainage and sufficient capacity to withstand the load must be provided on site. Optical system made of anodized aluminum. With rotationally symmetrical, medium-wide light distribution. Beam angle 30°. 1 chip on board LED. Rated luminous flux 2900 lm, rated power 26.00 W, luminaire luminous efficacy 111 lm/W. Light color neutral white, correlated color temperature (CCT) 4000 K, general color rendering index (CRI) Ra > 80. Color location tolerance (initial MacAdam) 3 SDCM, average rated service life L80(tq 25 °C) = 50,000 h. Spotlight housing and end ring made of die-cast aluminum, color deep black, similar to RAL 9005, powder-coated. (RAL 9005). Cover ring permanently attached with locking screws and threaded inserts made of stainless steel. Cover screen made of 15 mm thick, clear, tempered glass. Can be driven over at walking speed up to 2000 kg. Protection class (EN 61140): I, Protection type (DIN EN 60529): IP68, Protection type lamp compartment: IP68, Shock resistance level according to IEC 62262: IK10. Weight: 3.8 kg. Wired and ready for connection. With connecting cable led to the outside, sealed in accordance with the protection type. Internal connection compartment sealed with epoxy resin. With electronic control gear, switchable. The light is suitable for operation on a 230 V direct current network (DC). The light is suitable for operation on a 230 V direct current network (DC). (ACmin= , ACmax= 264 V). The product meets the basic requirements of the applicable EU directives and the product safety law and bears the CE marking.
| Property | Value |
| Nominal voltage: | 230 V |
| Socket: | other |
| With light source: | yes |
| With operating device: | yes |
| Installation diameter: | 213 mm |
| Housing color: | black |
| Operating device: | electronic transformer |
| Outer diameter: | 224 mm |
| Light source: | LED not replaceable |
| Suitable for number of lights: | 1 |
| Protection type (IP): | IP68 |
| Protection class: | I |
| Electrical connection with plug-in system: | no |
| Cover material: | transparent glass |
| Adjustable: | no |
| Light distribution: | symmetrical |
| Roll-over: | yes |
| Rated luminous flux according to IEC 62722-2-1: | 2900 lm |
| Color temperature: | 4000 K |
| Color rendering index CRI: | 80-89 |
| Light color: | white |
| Max. Load: | 2000 kg |
| Voltage type: | AC/DC |
| Dimming 0-10 V: | no |
| Dimming 1-10 V: | no |
| Dimming DALI: | no |
| Dimming DMX: | no |
| Dimming DSI: | no |
| Dimming potentiometer (integrated into the device): | no |
| Dimming GPRS: | no |
| Dimming LineSwitch: | no |
| Dimming manufacturer-specific: | no |
| Dimming mains voltage modulation: | no |
| Dimming trailing edge: | no |
| Dimming leading edge: | no |
| Dimming programmable: | no |
| Dimming RF: | no |
| Dimming Sine Wave Reduction: | no |
| Dimming Touch and Dim: | no |
| Dimming Zigbee: | no |
| Dimming with push button: | no |
| Without dimming function: | yes |
| Light distributor: | Focus lens |
| Beam angle: | wide beam 41-80° |
| Energy efficiency class of the built-in lamp: | other |
| Max. System power: | 26 W |
| Power factor: | 0.95 |
| Height/depth: | 266 mm |
| Installation height/depth: | 500 mm |
| Type of wiring: | Termination |
| Number of poles: | 3 |
| Connection type: | other |
