Round LED downlight with high-gloss aluminum reflector. Recessed downlight for sawn ceiling openings. Installation in cast concrete ceilings using accessories. Tool-free ceiling installation using quick-mounting springs. Suitable for installation in ceiling cutouts of Ø 210 mm - Ø 225 mm. In conjunction with a renovation ring as an optional accessory, ceiling openings up to Ø 260 mm are covered. Installation depth > 105 mm. High-gloss anodized aluminum reflector. Rated luminous flux 1800 lm, rated power 16.00 W, luminous efficacy 112 lm/W. Light color neutral white, correlated color temperature (CCT) 4000 K, general color rendering index (CRI) Ra > 80. Color location tolerance (initial MacAdam) 3 SDCM, average rated service life L80(tq 25 °C) = 70,000 h, average rated service life L85(tq 25 °C) = 50,000 h. The light source is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). Ceiling ring and heat sink made of die-cast aluminum. Surface coated white (RAL 9016). External dimensions of ceiling ring Ø 236 mm, luminaire height 103 mm. Permissible ambient temperature (ta): -20 °C - +25 °C. In conjunction with a closed decorative cover, protection class IP54 is achieved on the room side. Protection class (EN 61140): I, protection type (DIN EN 60529): IP20, shock resistance level according to IEC 62262: IK03, test temperature glow wire test according to IEC 60695-2-11: 850 °C. Weight: 1.0 kg. With 5-pin connection terminal up to 2.5 mm2 for mains connection and mains forwarding. With electronic control gear, digitally dimmable (DALI). Control gear according to DALI-2 standard (EN 62386). Luminaire can be switched and dimmed using a touch function via DALI control terminals (Touch DIM). The control gear is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). The product meets the essential requirements of the applicable EU directives and the Product Safety Act and bears the CE marking.
Property | Value |
Max. System power: | 16 W |
Rated luminous flux according to IEC 62722-2-1: | 1800 lm |
Housing color: | white |
Housing material: | aluminum |
Protection class (IP): | IP20 |
Outer diameter: | 236 mm |
Socket: | other |
Light source: | LED not replaceable |
Protection class: | I |
With light source: | yes |
Installation height/depth: | 105 mm |
With operating device: | yes |
Suitable for recessed mounting: | yes |
Height/depth: | 103 mm |
With motion detector: | no |
Color temperature: | 4000 K |
Nominal voltage: | 230 V |
Beam angle: | extremely wide beam >80° |
Color rendering index CRI: | 80-89 |
Suitable for ceiling mounting: | yes |
Light distribution: | symmetrical |
Operating device: | electronic transformer |
Impact resistance: | IK03 |
Luminaire with limited surface temperature 'D-mark': | no |
Reflector: | high gloss |
Suitable for number of bulbs: | 1 |
Luminous flux: | 1800 lm |
Cover material: | without |
Covering of the lamp with thermal insulation material possible: | yes |
Voltage type: | AC |
Light color: | white |
Suitable for track mounting: | no |
Adjustability: | not adjustable |
Suitable for clamp mounting: | no |
Suitable for pendulum suspension: | no |
Suitable for platform/floor mounting: | no |
Suitable for traverse mounting: | no |
With light sensor: | no |
Suitable for surface mounting: | no |
Suitable for cable system: | no |
Surface: | powder-coated |
Brushed surface: | no |
Dimming depending on operating device: | yes |
Dimming 0-10 V: | no |
Dimming 1-10 V: | no |
Dimming DALI: | yes |
Dimming DMX: | no |
Dimming DSI: | no |
Dimming potentiometer (device integrated): | no |
Dimming GPRS: | no |
Dimming LineSwitch: | no |
Dimming manufacturer-specific: | no |
Dimming mains voltage modulation: | no |
Dimming trailing edge: | no |
Dimming phase control: | no |
Dimming programmable: | no |
Dimming RF: | no |
Dimming Sine Wave Reduction: | d>no|
Dimming Touch and Dim: | yes |
Dimming Zigbee: | no |
Dimming with push button: | yes |
Without dimming function: | no |
Light distributor: | Reflector |
Light emission: | direct |
Energy efficiency class of the built-in lamp: | other |
Total harmonic distortion (THD): | 14 |
Protection class (NEMA): | other |
Rated ambient temperature according to IEC62722-2-1: | -20 to 25 °C |
Luminous intensity: | 958 cd |
Type of wiring: | suitable for through wiring |
Power factor: | 0.9 |
Number of poles: | 5 |
Connection type: | Plug-in terminal |
Luminous efficacy: | 113 lm/W |
Suitable for computer workstations in accordance with EN 12464-1: | no |
Glow wire test in accordance with IEC 60695-2-11: | 850 °C - 30 s |
Photobiological safety according to EN 62471: | RG0 |
Colour consistency (McAdam ellipse): | SDCM3 |