Trilux 6906300 LiveLink Sensor IR Micro 01 Sensor

LiveLink sensor unit with integrated PIR presence sensor and light sensor for connection to a LiveLink control unit, for daylight-dependent control and high-resolution presence detection. Connection and electrical supply via the DALI interface of the LiveLink control unit. Constant light control with switch-off function when there is sufficient daylight. Passive infrared presence sensor, with highly sensitive multi-segment pyro sensors, with adjustable switch-off delay time, optionally in automatic mode (automatic on, automatic off) or semi-automatic mode (automatic off, manual on). Special IQ mode for automatically adjusting the follow-up time to the use of the room. Temperature range 0 °C - +40 °C. Integrated pyro sensor for the highest detection quality with 168 detection zones. A presence area of 16 m2 enables the detection of the smallest movements. Square detection, presence detection squares max. 4 mx 4 m (16 m2) / radial max. 4 mx 4 m (16 m2) / tangential max. 6 mx 6 m (36 m2) at a recommended installation height of 2.8 m, permissible installation height 2.5 m to 4 m. Protection class IP20. Color white. Ceiling mounting on standard hollow wall box with enclosed mounting ring and two fastening screws, to be provided on site. Tool-free fastening of the IR Micro sensor in the cover cap. Retaining lugs for easy mounting of the cover cap on the mounting ring. Connection of the IR Micro sensor via pre-assembled DALI terminal, suitable for DALI forwarding, cable cross-section max. 1.5 mm2. Electrical supply via the DALI interface of the control unit (2 DALI participants). No additional mains connection required. Commissioning via secure WLAN connection (WPA2 encryption) with the LiveLink control unit via LiveLink Install App and tablet PC (iOS/Android). Adjustable parameters: setpoint for constant light control, switch-off delay time, semi-/fully automatic, activation of IQ mode, range test. DALI 2 certified product.