Ball-proof LED surface-mounted luminaire with CDP cover plate, tested according to DIN0710-13. Suitable for use in sports facilities according to DIN 18032-3. The tests were carried out by an institute accredited according to DIN EN ISO 17025 (VDE Testing and Validation Institute GmbH / ISP GmbH - Institute for Sports Facility Testing, Münster). LED modules and operating devices are sustainably combined in one assembly. This can be replaced without dismantling the luminaire body and the optical system from the ceiling construction. The assembly is available as an accessory that must be ordered separately. Surface-mounted luminaire for ceiling mounting. Can also be used as a recessed or suspended luminaire with accessories. With highly efficient CDP microprismatic. With symmetrical, wide-beam light distribution. Rated luminous flux 16000 lm, rated power 136.00 W, luminaire luminous efficacy 117 lm/W. Light color neutral white, correlated color temperature (CCT) 4000 K, general color rendering index (CRI) Ra > 90 (TLCI >80). Average rated service life L90 (tq 25 °C) = 35,000 h, average rated service life L80 (tq 35 °C) = 90,000 h. The light source is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). Luminaire body made of sheet steel, white powder-coated. Surface coated white (RAL 9016). Dimensions (L x W): 1548 mm x 309.5 mm, luminaire height 97 mm. With breakout openings on the front for heat-resistant through-wiring. Ball-proof in accordance with DIN 18032-3. Permissible ambient temperature (ta): -20 °C - +35 °C. Protection class (EN 61140): I, protection type (DIN EN 60529): IP20, shock resistance according to IEC 62262: IK08, test temperature glow wire test according to IEC 60695-2-11: 650 °C. Weight: 11.3 kg. With 5-pin connection terminal up to 2.5 mm2 for mains connection and mains forwarding. With two electronic control gear, digitally dimmable (DALI). Control gear according to DALI-2 standard (EN 62386). Luminaire can be switched and dimmed using a touch function via DALI control terminals (Touch DIM). The control gear is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). The luminaire can be equipped with the Monitoring ready (MOR) functionality on request. The product meets the basic requirements of the applicable EU directives and the Product Safety Act and bears the CE marking. In addition, the luminaire is ENEC-certified by an independent testing body.
Property | Value |
Max. System power: | 136 W |
Rated luminous flux according to IEC 62722-2-1: | 16000 lm |
Protection class: | I |
Impact resistance: | IK08 |
Protection class (IP): | IP20 |
Housing color: | white |
Color temperature: | 4000 K |
Suitable for number of bulbs: | 1 |
Light source: | LED not replaceable |
Length: | 1548 mm |
Width: | 310 mm |
Height/depth: | 97 mm |
Socket: | other |
With light source: | yes |
Operating device: | electronic transformer |
Nominal voltage: | 230 V |
Beam angle: | wide beam 41-80° |
DALI dimming: | yes |
Light color: | white |
With control gear: | yes |
Voltage type: | AC |
Suitable for emergency lighting: | no |
Housing material: | steel |
With protective cover: | yes |
Ball-proof: | yes |
Luminaire with limited surface temperature 'D-mark': | no |
Color rendering index CRI: | 90-100 |
Light distribution: | symmetrical |
Suitable for secondary lamps: | no |
Dimming 0-10 V: | no |
Dimming 1-10 V: | no |
Dimming DMX: | no |
Dimming DSI: | no |
Dimming leading edge: | no |
Dimming leading edge: | no |
Di mmung potentiometer (device integrated): | no |
Dimming GPRS: | no |
Dimming LineSwitch: | no |
Dimming manufacturer-specific: | no |
Dimming mains voltage modulation: | no |
Dimming programmable: | no |
Dimming RF: | no |
Dimming Sine Wave Reduction: | no |
Dimming Touch and Dim: | yes |
Dimming Zigbee: | no |
Dimming with push button: | no |
Without dimming function: | no |
Light distributor: | other |
Energy efficiency class of the permanently installed lamp: | other |
Rated service life L70/B50 at 25 °C: | 70000 h |
Protection class (NEMA): | other |
Glow wire test according to IEC 60695-2-11: | 650 °C - 30 s |
Rated ambient temperature according to IEC62722-2-1: | 25 °C |
Power factor: | 0.95 |
Installation width: | 335 mm |
Installation height/depth: | 110 mm |
Installation length: | 1555 mm |
Type of wiring: | suitable for through-wiring |
Number of poles: | 5 |
Connection type: | Plug-in terminal |