Round LED damp-room surface-mounted luminaire. For wall or ceiling mounting. With opal PC cover, impact-resistant. With Lambertian light distribution. Glare rating according to UGR classification (EN 12464-1) < 22. Luminaire luminous flux adjustable in 3 stages. Minimum luminaire luminous flux 800 lm, rated power 9.00 W. Maximum luminaire luminous flux 2200 lm, rated power 19.00 W. Luminaire luminous efficacy 88 lm/W. Light color neutral white, correlated color temperature (CCT) 4000 K, general color rendering index (CRI) Ra > 80. Color location tolerance (initial MacAdam) 5 SDCM, average rated service life L65(tq 25 °C) = 50,000 h. The light source is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). Lamp body made of plastic, white (RAL 9016). Diameter of the cover Ø 300 mm, lamp height 85 mm. Protection class (EN 61140): II, protection type (DIN EN 60529): IP65, shock resistance level according to IEC 62262: IK10, test temperature glow wire test according to IEC 60695-2-11: 650 °C. Weight: 0.9 kg. With electronic control gear, switchable. The control gear is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). Control gear in multi-lumen version, luminous flux setting in delivery state: 2000 lm. The product meets the basic requirements of the applicable EU directives and the product safety law and bears the CE marking. In addition, the luminaire is ENEC-certified by an independent testing body.
| Property | Value |
| Max. System power: | 19 W |
| Rated luminous flux according to IEC 62722-2-1: | 2200 lm |
| Suitable for number of lamps: | 1 |
| Height/depth: | 85 mm |
| Protection rating (IP): | IP65 |
| Protection class: | II |
| Luminaire with limited surface temperature 'D-mark': | no |
| Nominal voltage: | 220 to 240 V |
| Housing color: | white |
| Housing material: | plastic |
| Color temperature: | 4000 K |
| Impact resistance: | IK10 |
| Color rendering index CRI: | 80-89 |
| Suitable for ceiling mounting: | yes |
| Suitable for wall mounting: | yes |
| Outer diameter: | 300 mm |
| Voltage type: | AC |
| With motion detector: | no |
| Beam angle: | free beam/diffuse |
| With light source: | yes |
| Light source: | LED not replaceable |
| Rated ambient temperature according to IEC62722-2-1: | 25 °C |
| Socket: | other |
| Connection type: | plug-in terminal |
| With operating device: | yes |
| Cover material: | opal plastic |
| Light distributor: | diffuser lens/optics/panel |
| Without dimming function: | yes |
| Light emission: | direct/indirect |
| Light distribution: | symmetrical |
| With light sensor: | no |
| Operating device: | electronic transformer |
| Suitable for built-in installation: | no |
| Light color: | white |
| Suitable for computer workstations in accordance with EN 12464-1: | no |
| Suitable for light strip configuration: | no |
| Suitable for pendulum suspension: | no |
| Suitable for surface mounting: | yes |
| Suitable for emergency lighting: | no |
| Design of the grid: | without |
| Covering of the lamp with thermal insulation material possible: | yes |
| Dimming DMX: | no |
| Dimming DSI: | no |
| With air slots: | no |
| Dimming LineSwitch: | no |
| Dimming Potentiometer (integrated in the device): | no |
| Dimming 0-10 V: | no |
| Dimming GPRS: | no |
| Dimming 1-10 V: | no |
| Dimming manufacturer-specific: | no |
| Dimming DALI: | no |
| Dimming mains voltage modulation: | no |
| Dimming phase control: | no |
| Phase control dimming: | no |
| Programmable dimming: | no |
| RF dimming: | no |
| Sine Wave Reduction dimming: | no |
| Touch and Dim dimming: | no |
| Zigbee dimming: | no |
| Push button dimming: | no |
| Dimming depending on the operating device: | no |
| Rated service life L70/B50 at 25 °C: | 50000 h |
| Protection class (NEMA): | other |
| Glow wire test according to IEC 60695-2-11: | 650 °C - 30 s |
| Luminaire luminous efficacy: | 116 lm/W |
| Power factor: | 0.5 |
| Type of wiring: | Termination |
| Number of poles: | 3 |
| Conductor cross-section: | 1.5 mm² |
