Trilux 7533951 ArimoFit M73 DW19 IP 42-840 ETDD LED recessed luminaire, white

Square LED recessed luminaire with translucent cover panel DW. Version M73 (600 mm x 600 mm). Version with increased protection class IP54 on the room side. The luminaire can optionally be equipped with an emergency lighting system for ceiling installation with an emergency lighting operating time of 3 hours. In emergency light mode, the luminaire luminous flux is 575 lm. Creation of a deeper spatial effect. Complies with DIN 10500. The luminaires are suitable for use in HACCP, IFS Version 6 and/or BRC Global Standard Food Version 7 certified companies in the food and beverage industry. LED insert luminaire for system ceilings with visible mounting rails. The luminaire body is flush with the ceiling system on the room side. The optical system consists of a translucent, non-yellowing PMMA cover with a high degree of transmission. The surface of the cover is smooth and free of visible, microprismatic structures. With deep-wide beam light distribution. Glare rating according to UGR classification (EN 12464-1) < 19. Suitable for screens in accordance with EN 12464-1 due to limited luminance L 3000 cd/m2 for beam angles above 65° all around. Harmonious lighting effect due to evenly illuminated light emission. Individual design of the light emission surface (e.g. by printing) and other special solutions available on request. Rated luminous flux 4200 lm, rated power 31.00 W, luminaire luminous efficacy 135 lm/W. Light color neutral white, correlated color temperature (CCT) 4000 K, general color rendering index (CRI) Ra > 80. Color location tolerance (initial MacAdam) 3 SDCM, average rated service life L80(tq 25 °C) = 100,000 h, average rated service life L90(tq 25 °C) = 50,000 h. Luminaire body made of extruded aluminum profile. Surface coated white (RAL 9016). Weight: 3.4 kg. The narrow flank profile is flush with the support rail. The luminaire frame is profiled in 3 dimensions to create a depth effect in the ceiling. Luminaire can be covered with insulation material at ta 25 °C, can also be used at ta35 °C without insulation material. Protection class (EN 61140): II, protection type (DIN EN 60529): IP20, protection type on the room side: IP54, shock resistance level according to IEC 62262: IK02, test temperature glow wire test according to IEC 60695-2-11: 650 °C. Reverse polarity protected quick connection with mains transmission up to Ø 2.5 mm2. Connection of the ballast to the luminaire using a plug connection (plug and play). The packaging concept of the luminaire enables the control gear to be removed separately for pre-assembly, the other components of the luminaire remain protected until final assembly. With external control gear, digitally dimmable (DALI). Control gear according to DALI-2 standard (EN 62386). Control gear is idle-proof and protected against incorrect connection, short circuit, overload and overheating. The control gear is replaceable. Output ripple of the operating device 4% for effective control of the LED system and flicker-free light. The touch DIM function enables the luminaire to be switched and dimmed using a button via the DALI conductor pair. The luminaire can be equipped with the Monitoring ready (MOR) functionality on request. The product meets the basic requirements of the applicable EU directives and the Product Safety Act and bears the CE mark. In addition, the luminaire is ENEC-certified by an independent testing body. The luminaire is part of a range of recessed, surface-mounted and suspended luminaires that are coordinated in terms of appearance. The variety of applications of the product range is further underlined by variants in the area of luminous flux packages, light distribution curves and protection classes. On request, the basic range can be expanded to include project-specific luminaire features.