Luminaire head of the modular, decorative LED light column system. Version with clear PMMA cover. The column system is designed for use in areas of terrain category 1 to wind zone 4. For mounting on a compatible system standpipe. Compatible system standpipes available as a separate unit in various lengths and alternatively with a base plate or anchor piece. The steel standpipes have a diameter of 193.7 mm. Optical system designed using multi-lens technology (MLT). Luminaire optics consisting of highly efficient, UV and temperature-resistant lens systems. With asymmetrical, wide-beam light distribution. Other beam characteristics are available for flexible adaptation to customer-specific lighting tasks. Rated luminous flux 2200 lm, rated power 17.00 W, luminaire luminous efficacy 129 lm/W. Light color neutral white, correlated color temperature (CCT) 4000 K, general color rendering index (CRI) Ra > 70. Color location tolerance (initial MacAdam) 5 SDCM, other LED light colors available on request. Average rated service life LCLO(tq 25 °C) = 100,000 h. The light source is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). Luminaire body made of die-cast aluminum Ø 193.7 mm. Color anthracite, similar to DB703 with metallic effect, highly weather-resistant, powder-coated. (DB 703). Coating suitable for sea weather on request. Other colors and anti-graffiti coating on request. End cylinder made of PMMA, clear. Luminaire body can be rotated horizontally by 360 °. No screws are visible in the connection area between the standpipe and the luminaire head. A design gap visually underlines the modularity of the light column system. Protection class (EN 61140): II, protection type (DIN EN 60529): IP65, shock resistance level according to IEC 62262: IK05. Wind attack area fw 0.190 m2. Weight: 15.2 kg. Wired ready for connection with freely hanging electrical connection cable. Electrical connection to 3-pin connection terminal up to 2.5 mm2. With electronic control gear, switchable. Control gear according to DALI-2 standard (EN 62386). The control gear is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). Surge voltage resistance 6/10 kV. Parameterizable ballast with constant luminous flux (CLO). Connected load at end of service life: 18.00 W. With SLR (Smart Lighting Ready) equipment for subsequent integration of components for light management systems. The standardized base according to Zhaga is attached to the top of the luminaire head. The luminaire is designed for the D4I standard and Zhaga / D4I certified. The product meets the basic requirements of the applicable EU directives and the Product Safety Act and bears the CE marking. In addition, the light is ENEC-certified by an independent testing center.
| Property | Value |
| Cover material: | transparent plastic |
| Housing color: | anthracite |
| Impact resistance: | IK05 |
| With light source: | yes |
| Protection class: | II |
| Light source: | LED not replaceable |
| Nominal voltage: | 220 to 240 V |
| Suitable for number of bulbs: | 1 |
| Diameter: | 193.7 mm |
| Socket: | other |
| Material of the housing: | aluminium |
| Protection class (IP): | IP65 |
| Type of lamp: | Stele |
| Operating device: | electronic transformer |
| Rated luminous flux according to IEC 62722-2-1: | 2200 lm |
| Color temperature: | 4000 K |
| Color rendering index CRI: | 70-79 |
| Light color: | white |
| With control gear: | yes |
| With motion detector: | no |
| With light sensor: | no |
| Voltage type: | AC |
| With base plate: | no |
| Surface: | powder-coated |
| Light distributor: | focus lens |
| Energy efficiency class of the built-in lamp: | other |
| Rated service life L70/B50 at 25 °C: | 100000 h |
| Protection class (NEMA): | other |
| Max. System power: | 18 W |
| Power factor: | 0.9 |
| Height/depth: | 1044 mm |
| Wiring type: | Termination |
| Number of poles: | 2 |
| Connection type: | other |
