Rectangular LED pendant luminaire, direct-indirect beam, with full-surface, rimless PMMA cover. For single or light strip applications using accessories to be ordered separately. Suitable for through-wiring. With an internal microprismatic cover panel and a smooth, opal PMMA cover on the room side. With symmetrical, wide-beam light distribution, direct-indirect (70/30%). Glare rating according to UGR classification (EN 12464-1) < 19. Suitable for screens in accordance with EN 12464-1 due to limited luminance L 3000 cd/m2 for beam angles above 65° all around. Minimum luminaire luminous flux 5300 lm, rated power 43.00 W. Maximum luminaire luminous flux, rated power 0.00 W. Luminaire luminous efficacy 123 lm/W. Light color neutral white, correlated color temperature (CCT) 4000 K, general color rendering index (CRI) Ra > 80. Color tolerance (initial MacAdam) 3 SDCM, average rated service life L80(tq 25 °C) = 50,000 h. The light source is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). Luminaire body made of sheet steel, silver-gray powder-coated (RAL 9006). Dimensions (L x W): 1127 mm x 160 mm, luminaire height 47 mm. Protection class (EN 61140): I, protection type (DIN EN 60529): IP20, shock resistance level according to IEC 62262: IK03, test temperature glow wire test according to IEC 60695-2-11: 650 °C. Weight: 4.4 kg. With electronic control gear, digitally dimmable (DALI). Control gear in accordance with DALI-2 standard (EN 62386). Luminaire can be switched and dimmed using a touch function via DALI control terminals (Touch DIM). The control gear is replaceable in accordance with ecodesign requirements (VO (EU) 2019/2020). The luminaire can be equipped with the Monitoring ready (MOR) functionality on request. With integrated LiveLink Sensor IR Micro for connection to a LiveLink control unit for daylight-dependent control and presence detection. Connection and electrical supply via the DALI interface of the LiveLink control unit Occupies 2 DALI participants. Constant light control with switch-off function when there is sufficient daylight. Passive infrared presence sensor, with highly sensitive multi-segment pyro sensors, with adjustable switch-off delay time, optionally in automatic mode (automatic on, automatic off) or semi-automatic mode (automatic off, manual on). Special IQ mode for automatically adjusting the follow-up time to the use of the room. Temperature range -25 °C - +55 °C. Integrated pyrosensor for the highest detection quality with 168 detection zones. A presence area of 16 m2 enables the detection of the smallest movements. Square detection, detection squares presence max. 4 mx 4 m (16 m2) / radial max. 4 mx 4 m (16 m2) / tangential max. 6 mx 6 m (36 m2) with a recommended installation height of 2.8 m, permissible installation height 2.5 m to 4 m. The product meets the basic requirements of the applicable EU directives and the Product Safety Act and bears the CE marking.
Property | Value |
Max. System power: | 43 W |
Rated luminous flux according to IEC 62722-2-1: | 5300 lm |
Color temperature: | 4000 K |
Length: | 1127 mm |
Width: | 160 mm |
Socket: | other |
Suitable for number of bulbs: | 1 |
Height/depth: | 47 mm |
Protection type (IP): | IP20 |
Protection class: | I |
Pendant length: | 2000 mm |
Operating device: | electronic transformer |
Housing material: | steel |
Suitable for computer workstations in accordance with EN 12464-1: | yes |
With light source: | yes |
With Operating device: | yes |
Nominal voltage: | 220 to 240 V |
Suspension included: | no |
Cover material: | matt/satin plastic |
Light source: | LED not replaceable |
Housing color: | silver |
Design of the grid: | without |
Reflector: | white |
Suitable for light strip configuration: | yes |
Direct/indirect components separately adjustable: | no |
Light distribution: | symmetrical |
Light emission: | direct/indirect |
Impact resistance: | IK03 |
Luminaire with limited surface temperature 'D-mark': | no |
Color rendering index CRI: | 80-89 |
Suitable for Emergency light: | no |
Light color: | white |
Voltage type: | AC |
Dimming 0-10 V: | no |
Dimming 1-10 V: | no |
Dimming DALI: | yes |
Dimming DMX: | no |
Dimming programmable: | no |
Dimming DSI: | no |
Dimming RF: | no |
Dimming potentiometer (device integrated): | no |
Dimming GPRS: | no |
Dimming LineSwitch: | no |
Dimming manufacturer-specific: | no |
Dimming mains voltage modulation: | no |
Dimming phase control: | no |
Phase control dimming: | no |
Sine wave reduction dimming: | no |
Touch and dim dimming: | yes |
Zigbee dimming: | no |
Dimming with push button: | no |
Without dimming function: | no |
Light distributor: | other |
Energy efficiency class of the permanently installed light source: | other |
Protection class (NEMA): | other |
Glow wire test according to IEC 60695-2-11: | 650 °C - 30 s |
Power factor: | 0.95 |
Type of wiring: | suitable for through wiring |
Number of poles: | 5 |
Connection type: | Plug-in terminal |