Next generation LED top-mounted and side-mounted luminaire with clear lines and an attractive silhouette. With intelligent label for quickly accessing luminaire information using a QR code. With SLR equipment (Smart Lighting Ready) for subsequent integration of components for lighting management systems. Standardized bases according to Zhaga are attached to the top of the luminaire head and to the lower cover. The luminaire is designed for the D4I standard and Zhaga / D4I certified. Top-mounted and side-mounted mounting on or to a mast spigot Ø 76 mm. Tilt angle 0°...90°, adjustable in 5° increments, scaled. Easily and quickly adjustable from top-mounted to side-mounted luminaire using a screw accessible from the outside. Mounting on walls is possible using accessories that must be ordered separately. The mast is attached using two stainless steel fastening screws in accordance with EN 60598-2-3. Also suitable for mounting on masts with a spigot Ø 42, 48 and 60 mm using reducers that must be ordered separately. Matching mast on request. In MLT design (multi-lens technology), consisting of highly efficient, UV and temperature-resistant lens systems in a quadruple arrangement. With asymmetrical wide beam light distribution. Other beam characteristics are available for flexible adaptation to customer-specific lighting tasks. The subsequent installation of a rear / side shield is possible as an accessory that must be ordered separately. LED system consisting of 12 MLT LED modules with 4 LEDs each. Rated luminous flux 18000 lm, rated power 128.00 W, luminaire luminous efficacy 140 lm/W. Light color neutral white, correlated color temperature (CCT) 4000 K, general color rendering index (CRI) Ra > 70. Color location tolerance (initial MacAdam) 5 SDCM. Average rated service life Lclo(tq 25 °C) = 100,000 h. The light source is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). The rated luminous flux of the luminaire can be reduced by 50% using an app and NFC (Near Field Communication). 100% of the rated luminous flux is set when delivered. Luminaire body made of die-cast aluminum. Pivot point made of UV and weather-resistant ASA. Luminaire body anthracite powder-coated, similar to DB 703. With metallic effect, highly weather-resistant, powder-coated. Pivot point silver-gray, similar to RAL 9006. The fastening elements are coated in the housing color. VG compartment cover made of die-cast aluminum that can be opened without tools using a toggle lever lock. The E-block can be removed without tools. The replaceable cover made of heat-treated single-pane safety glass is securely attached to the luminaire housing with four stainless steel fastening elements. The cover is equipped with a durable, UV-resistant polyurethane seal. Coating suitable for marine weather on request. Protection class (EN 61140): II, protection type (DIN EN 60529): IP66, impact resistance level according to IEC 62262: IK09. Mast available on request. Wind attack area fw 0.140 m2. Weight: 8.1 kg. With connected, 10000 mm long supply cable. With electronic control gear, switchable. Control gear in accordance with DALI-2 standard (EN 62386). The control gear is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). Surge voltage resistance 6/10 KV (differential mode / common mode). Configurable ballast with constant luminous flux (CLO). Connected load at end of service life: 134.00 W. The product meets the basic requirements of the applicable EU directives and the product safety law and bears the CE marking. In addition, the luminaire is ENEC-certified by an independent testing body.
| Property | Value |
| Length: | 750 mm |
| Width: | 245 mm |
| Height/depth: | 101 mm |
| Suitable for number of bulbs: | 1 |
| Max. System power: | 134 W |
| Rated luminous flux according to IEC 62722-2-1: | 16500 lm |
| Color temperature: | 4000 K |
| Suitable for spigot size: | 76 mm |
| Nominal voltage: | 220 to 240 V |
| Housing color: | anthracite |
| Operating device: | electronic transformer |
| With Light source: | yes |
| Light source: | LED not replaceable |
| Socket: | other |
| Protection rating (IP): | IP66 |
| Protection class: | II |
| Impact resistance: | IK09 |
| Mounting type: | Attachment/approach |
| Color rendering index CRI: | 70-79 |
| Voltage type: | AC |
| With control gear: | yes |
| Adjustable optics: | no |
| Cover material: | transparent glass |
| Housing material: | aluminum |
| Remote control: | without |
| Cable length: | 10 m |
| Constant luminous flux control: | yes |
| Light color: | white |
| With connection cable: | yes |
| With radio control: | no |
| With program-controlled light control: | no |
| Surface: | powder-coated |
| Dimming 0-10 V: | no |
| Dimming 1-10 V: | no |
| Dimming DALI: | no |
| Dimming DMX: | no |
| Dimming DSI: | no |
| Dimming potentiometer (device integrated): | no |
| Dimming GPRS: | no |
| Dimming LineSwitch: | no |
| Dimming manufacturer-specific: | no |
| Dimming mains voltage modulation: | no |
| Dimming Trailing edge: | no |
| Dimming leading edge: | no |
| Dimming programmable: | no |
| Dimming RF: | no |
| Dimming Sine Wave Reduction: | no |
| Dimming Touch and Dim: | no |
| Dimming Zigbee: | no |
| Dimming with push button: | no |
| Without dimming function: | no |
| Energy efficiency class of the built-in lamp: | other |
| Rated service life L70/B50 at 25 °C: | 100000 h |
| Protection class (NEMA): | other |
| Light distributor: | Focus lens |
| Luminaire with limited surface temperature 'D-mark': | no |
| Rated ambient temperature according to IEC62722-2-1: | -40 to 0 °C |
| Luminaire luminous efficacy: | 123 lm/W |
| Power factor: | 0.95 |
| Wiring type: | Termination |
| Number of poles: | 3 |
| Conductor cross-section: | 1.5 mm² |
| Connection type: | other |
