Round LED surface-mounted light with opal PMMA diffuser. With integrated HF motion sensor. Range up to 8 m. Detection angle approx. 120°. Sensitivity continuously adjustable from 20 - 100%. Hold time 10 - 300 seconds. Brightness threshold continuously adjustable from 5 - 1000 lx. Mounting height for ceiling mounting up to 4 m, for wall mounting up to 2.7 m. For wall or ceiling mounting. With round, spherically shaped diffuser slightly flattened at the light head, opal. Rated luminous flux 2100 lm, rated power 17.00 W, light output 123 lm/W. Light color warm white, correlated color temperature (CCT) 3000 K, general color rendering index (CRI) Ra > 80. Color tolerance (initial MacAdam) 3 SDCM, average rated service life L80(tq 25 °C) = 50,000 h. The light source is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). Luminaire body made of sheet steel. (RAL 9016). Diameter of the cover Ø 420 mm, luminaire height 84 mm. Luminaire suitable for accommodating a wide range of optional decorative accessories for independent design variants. Permissible ambient temperature (ta): - +25 °C. Protection class (EN 61140): I, protection type (DIN EN 60529): IP40, shock resistance level according to IEC 62262: IK02, test temperature glow wire test according to IEC 60695-2-11: 650 °C. Weight: 1.6 kg. With electronic control gear, switchable. The control gear is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). With integrated HF motion sensor. Shape of the detection area similar to an ellipse. Width of the detection area: 1 - 5 m. Length of the detection area: 0.5 - 5 m. Function parameters of the HF motion sensor can be adjusted using the optional IR remote control available as an accessory. The product meets the essential requirements of the applicable EU directives and the Product Safety Act and bears the CE marking.
Property | Value |
Max. System power: | 17 W |
Rated luminous flux according to IEC 62722-2-1: | 2100 lm |
Suitable for number of lamps: | 1 |
Height/depth: | 84 mm |
Protection rating (IP): | IP40 |
Protection class: | I |
Luminaire with limited surface temperature 'D-mark': | no |
Nominal voltage: | 230 to 240 V |
Housing color: | white |
Housing material: | steel |
Color temperature: | 3000 K |
Impact resistance: | IK02 |
Color rendering index CRI: | 80-89 |
Suitable for ceiling mounting: | yes |
Suitable for wall mounting: | yes |
Outer diameter: | 420 mm |
Energy efficiency class of the permanently installed light source: | other |
Voltage type: | AC |
Beam angle: | free beam/diffuse |
With light source: | yes |
Light source: | LED not replaceable |
Rated ambient temperature according to IEC62722-2-1: | -20 to 25 °C |
Socket: | other |
Connection type: | plug-in terminal |
With operating device: | yes |
Cover material: | opal plastic |
Light distributor: | diffuser lens/optics/panel |
Without dimming function: | yes |
Light emission: | direct/indirect |
Light distribution: | symmetrical |
Operating device: | electronic transformer |
Suitable for built-in installation: | no |
Light colour: | white |
Suitable for computer workstations in accordance with EN 12464-1: | no |
Suitable for light strip configuration: | no |
Suitable for pendulum suspension: | yes |
Suitable for surface mounting: | yes |
Suitable for Emergency light: | no |
Design of the grid: | without |
Covering of the light with thermal insulation material possible: | yes |
DMX dimming: | no |
DSI dimming: | no |
With air slots: | no |
LineSwitch dimming: | no |
Potentiometer dimming (integrated in the device): | no |
Dimming 0-10 V: | no |
Dimming GPRS: | no |
Dimming 1-10 V: | no |
Dimming manufacturer-specific: | no |
Dimming DALI: | no |
Dimming mains voltage modulation: | no |
Dimming phase control: | no |
Dimming Phase control: | no |
Dimming programmable: | no |
Dimming RF: | no |
Dimming Sine Wave Reduction: | no |
Dimming Touch and Dim: | no |
Dimming Zigbee: | no |
Dimming with push button: | no |
Dimming dependent on operating device: | no |
Protection class (NEMA): | other |
Glow wire test according to IEC 60695-2-11: | 650 °C - 30 s |
Luminaire luminous efficacy: | 124 lm/W |
Power factor: | 0.9 |
Number of poles: | 3 |