Surface-mounted luminaire for damp rooms and covered outdoor areas. With through-wiring 3 x 1.5 mm2. Suitable for use in HACCP, IFS and/or BRC Global Standard Food certified companies. With limited surface temperature, suitable for use in fire-hazardous rooms in accordance with DIN EN 60598-2-24. For ceiling, wall and suspended mounting. Wall mounting can be horizontal or vertical. Theft-proof installation possible using an anti-theft device that must be ordered separately. Mounting clips and triangle brackets for suspended mounting included in delivery. With opal PC cover. With Lambertian light intensity distribution. Luminaire luminous flux adjustable in 2 levels. Rated luminous flux 2600 lm - 3800 lm, rated power 20.00 W - 29.00 W, maximum luminous efficacy of luminaire 131 lm/W. Light color neutral white, correlated color temperature (CCT) 4000 K, general color rendering index (CRI) Ra > 80. Color tolerance (initial MacAdam) = 4 SDCM. Profile upper section made of extruded polycarbonate. PC end caps with UV protection. Profile lower section made of opal extruded polycarbonate. Dimensions (L x W): 1270 mm x 60 mm, luminaire height 60 mm. Permissible ambient temperature (ta): -20 °C - +30 °C. Protection class (EN 61140): II, protection type (DIN EN 60529): IP65, shock resistance level according to IEC 62262: IK08, test temperature glow wire test according to IEC 60695-2-11: . Weight: 1.6 kg. Cable entry with easy-to-install bayonet twist lock to seal the connection compartment. The luminaire is connected using a plug-in terminal. With electronic control gear, switchable. The product meets the basic requirements of the applicable EU directives and the Product Safety Act and bears the CE marking. In addition, the luminaire is ENEC-certified by an independent testing center.
| Property | Value |
| Rated luminous flux according to IEC 62722-2-1: | 3800 lm |
| Color temperature: | 4000 K |
| Color rendering index CRI: | 80-89 |
| Color consistency (McAdam ellipse): | SDCM4 |
| Protection class (IP): | IP65 |
| Impact resistance: | IK08 |
| Protection class: | II |
| Rated ambient temperature according to IEC62722-2-1: | 35 °C |
| Length: | 1270 mm |
| Width: | 60 mm |
| Height/depth: | 60 mm |
| Voltage type: | AC |
| Nominal voltage: | 220 - 240 V | Max. System power: | 29 W |
| Luminaire luminous efficacy: | 131 lm/W |
| Power factor: | 0.9 |
| With operating device: | yes |
| Operating device: | electronic transformer |
| Connection type: | Plug-in terminal |
| Number of poles: | 3 |
| With light source: | yes |
| Light emission: | direct/indirect |
| Light distribution: | symmetrical |
| Light distributor: | diffuser lens/optics/panel |
| Housing color: | grey |
| Cover material: | other |
| Luminaire with limited surface temperature 'D-mark': | yes |
| Suitable for surface mounting: | yes |
| Suitable for ceiling mounting: | yes |
| Suitable for pendant suspension: | yes |
| Suitable for light strip configuration: | yes |
| Total harmonic distortion (THD): | 14 |
| Photobiological safety according to EN 62471: | RG 0 |
| Flicker value Pst LM: | 0.3 |
| Strobe effect value SVM: | 0.3 |
| Weight: | 1.8 |
| Weight unit: | KG | >
| Version: | other |
| Conductor cross section: | 1.5 mm² |
| Design of the grid: | without |
| Suitable for number of bulbs: | 1 |
| Light color: | white |
| Without dimming function: | yes |
| Max. number of luminaires circuit breaker C16: | 63 |
| Max. Number of lights circuit breaker B16: | 37 |
| Luminous flux adjustable: | Levels |
| Surface protection housing: | untreated |
| Brief description: | Damp-proof lights 2315 MultiLumen 2 diffuser gray ET 29W 3800lm Lambertian (L) IP65 IK08 4 SDCM |
