Versatile outdoor mast light in a reduced, international design language and flat construction. With intelligent label for quickly accessing luminaire information using a QR code. Large version, length of luminaire head 680 mm. In combination with the mast attachment (ordered separately), can be used as a mast-top luminaire (spike size Ø 76 mm / Ø 60 mm, Jovie Z MB D...) or mast-mounted luminaire (spike size Ø 42 mm / Ø 60 mm, Jovie AZ MB D...). The inclination of the luminaire head can be adjusted in 4 ways. (0° / 5° / 10° / 15°). In MLT version (multi-lens technology), consisting of highly efficient, UV and temperature-resistant lens systems in a quadruple arrangement. Asymmetrical medium-wide beam light distribution for area lighting, e.g. parking spaces and storage areas. Front beam 35°. Additional beam characteristics are available for flexible adaptation to customer-specific lighting tasks. The light source can be replaced by qualified personnel. The LED system consists of MLT LED modules, each with 4 LEDs. Number of modules: 12. Rated luminous flux 13,500 lm, rated power 103.0 W, luminaire luminous efficacy 131 lm/W. Power factor 0.95. Efficiency version with material-optimized LED number. General color rendering index (CRI) > 70, correlated color temperature (CCT) 4000 K. Other LED light colors available on request. Average rated service life LCLO (tq 25 °C) 100,000. The light source is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). Luminaire body made of die-cast aluminum. Color DB703 anthracite. Coating suitable for marine weather on request. With PMMA cover screen, printed. Cover screen can be individually printed on customer request. Visible label behind the cover screen, protected against the effects of weather, on request. Protection class (EN 61140): 02, protection type (DIN EN 60529): 66, impact resistance level according to IEC 62262: IK09. Mast available on request. Wind attack area Fw (m²) = 0. Weight: 8.9 kg. The luminaire is connected without opening the luminaire body using the connecting cable that runs outwards. The control gear can be replaced by qualified personnel. With UV-resistant silicone connecting cable for laying cables outdoors, e.g. when mounting on trusses. Length of connecting cable: 14 m. With electronic control gear and power reduction via control phase. Reduction to 50% of the luminaire luminous flux after the control phase is switched off. Parameterizable ballast with constant luminous flux control (CLO). Connected load at end of service life: 108.00 W. Operating device according to DALI-2 standard (EN 62386). The operating device is replaceable in accordance with the ecodesign requirements (VO (EU) 2019/2020). The luminaire meets the requirements of the applicable EU directives and the Product Safety Act (CE marking). In addition, it is ENEC-certified by an independent testing body. Surge voltage resistance differential mode / common mode: 6 kV / 10 kV. The luminaire meets the requirements of EN 60598 and is designed for wind effects according to EN 1991 (Eurocode) with a base wind speed of up to 30 m/s (corresponds to wind zone 4 in Germany) in terrain category 1. This takes into account a snow load (up to 1 kN/m²) and icing (up to 2 cm) at a light point height in accordance with the installation instructions. Exposed locations (e.g. bridges, installation on buildings or directly next to railway tracks) are not taken into account. Impact loads are not taken into account.
| Property | Value |
| Length: | 680 mm |
| Width: | 316 mm |
| Height/depth: | 80 mm |
| Suitable for number of lamps: | 1 |
| Max. System power: | 108 W |
| Rated luminous flux according to IEC 62722-2-1: | 13500 lm |
| Color temperature: | 4000 K |
| Nominal voltage: | 220 to 240 V |
| Housing color: | anthracite |
| Operating device: | electronic transformer |
| With light source: | yes |
| Light source: | LED not replaceable |
| Socket: | other |
| Protection rating (IP): | IP66 |
| Protection class: | II |
| Impact resistance: | IK09 |
| Mounting type: | Attachment/approach |
| Color rendering index CRI: | 70-79 |
| Voltage type: | AC |
| With Operating device: | yes |
| Adjustable optics: | no |
| Cover material: | transparent plastic |
| Housing material: | aluminium |
| Remote control: | without |
| Cable length: | 14 m |
| Constant luminous flux control: | yes |
| Light color: | other |
| With Connection cable: | yes |
| With radio control: | no |
| With program-controlled light control: | no |
| Surface: | powder-coated |
| Dimming 0-10 V: | no |
| Dimming 1-10 V: | no |
| Dimming DALI: | no |
| Dimming DMX: | no |
| Dimming DSI: | no |
| Dimming potentiometer (device integrated): | no |
| Dimming GPRS: | no |
| Dimming LineSwitch: | yes |
| Dimming manufacturer-specific: | no |
| Dimming mains voltage modulation: | no |
| Dimming phase control: | no |
| Dimming Phase control: | no |
| Dimming programmable: | no |
| Dimming RF: | no |
| Dimming Sine Wave Reduction: | no |
| Dimming Touch and Dim: | no |
| Dimming Zigbee: | no |
| Dimming with push button: | no |
| Without dimming function: | no |
| Energy efficiency class of the permanently installed lamp: | other |
| Rated service life L70/B50 at 25 °C: | 100000 h |
| Protection class (NEMA): | other |
| Light distributor: | Focus lens |
| Luminaire with limited surface temperature 'D-mark': | no |
| Rated ambient temperature according to IEC62722-2-1: | 25 °C |
| Luminaire luminous efficacy: | 125 lm/W |
| Power factor: | 0.95 |
| Wiring type: | Termination |
| Number of poles: | 3 |
| Connection type: | other |
