Description
Features
Reviews
Inductive sensor, ATEX Category II 1 G, Ex Zone 0, ATEX Category II 1 D, Ex Zone 20, SIL2 (Low Demand Mode) according to IEC 61508, PL c according to ISO 13849-1 for HFT0, SIL3 (All Demand Mode) according to IEC 61508, PL e according to ISO 13849-1 for redundant design HFT1, M12 x 1 threaded barrel, brass, chrome-plated, DC 2-wire, nom. 8.2 VDC, output according to DIN EN 60947-5-6 (NAMUR), connector M12 x 1, rated switching distance: 5 mm, not flush
| Property | Value |
| Switching distance: | 5 mm |
| Type of voltage: | DC |
| Design of the switching output: | NAMUR |
| Mechanical installation condition for sensor: | not flush |
| Performance level according to EN ISO 13849-1: | Level c |
| Type of actuation: | metallic target |
| Frequency: | 2000 Hz |
| Length of sensor: | 52 mm |
| Pressure-resistant: | no |
| Diameter of sensor: | 12 mm |
| Design of electrical connection: | plug connection |
| Explosion protection category for gas: | ATEX gas explosion protection, cat. 1G |
| Explosion protection category for dust: | ATEX dust explosion protection, cat. 1D |
| Housing design: | cylinder, thread |
| Housing coating: | chrome-plated |
| Housing material: | metal |
| SIL according to IEC 61508: | 2 |
Features
Mechanical installation condition for sensor
Not flush
HAB
NI5-M12-Y1X-H1141
Manufacturer
HAN
40103
GTIN
4047101090772
Type of operation
Metallic target
Design of the switching output
NAMUR
Design of the electrical connection
Plug connection
Housing coating
Chrome-plated
Explosion protection category for gas
ATEX gas explosion protection, cat. 1G
Explosion protection category for dust
ATEX dust explosion protection, cat. 1D
Frequency
2000Hz
Housing design
Cylinder, thread
Length of the sensor
52 mm
Performance Level according to EN ISO 13849-1
Level c
SIL according to IEC 61508
2
Switching distance
5 mm
Voltage type
DC
Housing material
Metal
No reviews yet — your comment may be first.
All reviews 0
