Wired digital room thermostat for heating control as a wall unit. Temperature control accurate to the degree. 3 buttons. Operating mode: Comfort, Economy, Frost Protection, Off. Easy to use. Control range restriction. In order to plan the Vitramo heating system optimally, it is not only designed according to DIN EN 12831, but also adapted to the specific conditions of the building. During the planning phase, a building is divided into rooms, demand zones and heating areas depending on its size and use. A demand zone represents a room/room area that is determined by its specific type of use and conditions such as cooling, ventilation, air humidity, etc. Every room requires a room thermostat to regulate the air temperature. Wired room thermostats as room temperature controllers are wired directly to a heating element or connected via the DS-P control unit. Due to the structural conditions, these devices are often used in new buildings or as part of a renovation. If the installed power exceeds the specified switching capacity of the respective room thermostat, the heating elements must be switched via additional load relays type LS-E. In any case, the life of the room thermostat is extended if a load relay takes over the work.
Property | Value |
Type of power supply: | Battery |
Mounting type: | Surface-mounted |
Protection class (IP): | IP30 |
RAL number: | 9010 |
Height: | 80 mm |
Width: | 80 mm |
Depth: | 23 mm |
Heating: | yes |
Cooling: | no |
Number of heating outputs: | 1 |
With display: | yes |
Operation: | Button |
Color: | cream white |
Contact type: | Normally open |
Version: | On/Off |
Connection: | Two-wire |
With receiver: | no |
Measuring range lower value: | 5 °C |
Measuring range upper value: | 30 °C |
External sensor: | no |
Thermal feedback: | without |
Control characteristics: | other |
Difference value: | 0.5 K |
Difference adjustable: | no |
Temperature readable: | yes |
With noise level display: | no |
Sensor design: | Resistance sensor |
With drinking water circuit: | no |
Max. voltage of the contacts: | 230 V |
Max. Contact load: | 5 A |
Protection class (NEMA): | other |
Explosion-proof: | no |
Class of temperature controller: | I |