Digital flush-mounted room thermostat can be adapted separately as a stand-alone device or using intermediate rings in accordance with DIN 49075 in almost all surface switch systems. With an intermediate frame, which you can get from your switch manufacturer, you can easily integrate the room thermostat into an existing light switch system! A standard frame is included in the delivery if you do not want to integrate the room thermostat into an existing switch system. The controller measures the room temperature with an internal sensor and closes the heating contact if the temperature falls below the setpoint. The symbol signals the active heating phase. The digital weekly clock has 3 programs for switching between comfort and reduced temperatures. The controller is already preset to normal daily routines. Settings are saved permanently. The reset button resets to the factory settings. Temperature setting in 0.5 K increments. Sensor tolerance: 0.5 K. Switching difference: approx. 1 K. Power consumption: approx. 1 W. Heating contact: normally open max. 230 V 8 (1) A. Night-time reduction: normally open max. 230 V 10 mA. Internal sensor: NTC 47. Protection class: II after appropriate installation. Ambient temperature: 0...30°C. Storage temperature: -20...+70°C. Radio interference suppression: in accordance with EN 50081-1, EN 50082-1. Power reserve: 4 days, after 1 hour of operation. Valve protection: 5 min on/week. With installation instructions in original packaging. In order to plan the Vitramo heating system optimally, it is not only designed in accordance with DIN EN 12831, but also adapted to the special conditions of the building. During the planning phase, a building is divided into rooms, demand zones and heating areas depending on its size and use. A demand zone represents a room/room area that is determined by its specific type of use and conditions such as cooling, ventilation, humidity, etc. Each room requires a room thermostat to regulate the air temperature. Wired room thermostats as room thermostats
Digital room thermostat with clock as flush-mounted device
Operating mode: Automatic, Comfort, Setback, Party, Holiday, Off with frost protection
Programming: Weekly clock with individually adjustable daily routines
Display: illuminated graphic display
Setting range: 5&hellip,30°C
Operating voltage: 230V~, 50 Hz
Protection class II
Switching capacity: 10 A (2.2 kW)
Operating temperature: 0&hellip,35°C
Installation type: in flush-mounted box, adaptable to
almost all switch programs
Dimensions: 50 x 50 mm (without frame)
Protection class: IP30
| Features | Value |
| Type of power supply: | 230 V AC |
| Mounting type: | Flush-mounted |
| Protection class (IP): | IP30 |
| RAL number: | 9010 |
| Height: | 50 mm |
| Width: | 50 mm |
| Depth: | 46 mm |
| Heating: | yes |
| Cooling: | no |
| Number of heating outputs: | 1 |
| With display: | yes |
| Operation: | button |
| Color: | cream white |
| Contact type: | normally open |
| Design: | On/Off |
| Connection: | three-/four-wire |
| With Receiver: | no |
| Measuring range lower value: | 5 °C |
| Measuring range upper value: | 30 °C |
| Sensor external: | no |
| Thermal feedback: | without |
| Control characteristic: | PI |
| Difference value: | 0.5 K |
| Difference adjustable: | no |
| Temperature readable: | yes |
| With noise level indicator: | no |
| Sensor design: | Resistance sensor |
| With drinking water circuit: | no |
| Max. voltage of the contacts: | 230 V |
| Max. Contact load: | 10 A |
| Protection class (NEMA): | other |
| Explosion-proof: | no |
| Class of temperature controller: | I |
