The externally supplied signal converters/supply isolators ACT20M..., ACT20P..., MAS RPS/RPSH and WAS/WAZ 4/5 for the transmission, separation and conversion of standardized DC current signals are optionally available in widths of 6 mm (ACT20M...), 12.5 mm (WAS/WAZ4, ACT20P...) or 17.5 mm (WAS/WAZ5...).The input and output circuits as well as the power supply are completely galvanically isolated.The input signal is converted into a DC current or voltage value.WAVESERIES signal converters are optionally offered with a cut-off frequency of 10 Hz (WAS/WAZ4) or 20 kHz (WAS/WAZ5) for fast signal processing.The supply isolators MAS/RPS/RPSH can connect external 2-wire sensors (ACT20P 2-/3-wire sensors) and are optionally suitable for transmitting HART protocols (MAS RPSH, ACT20P). The 24 VDC supply voltage can be cross-connected on the module side via the CH20M BUS PROFILE (ACT20M Series) or plug-in bridges ZQV4N (MAS) or ZQV 2.5N (WAS/WAZ). International approvals such as ATEX Zone2, UL C1D2 and FM Div2 also enable use in potentially explosive areas.Technical data: signal converter, signal converter/isolator
| Property | Value |
| Height: | 117.2 mm |
| Depth: | 113.7 mm |
| Width: | 12.5 mm |
| Device design: | Built-in device |
| Protection class (IP): | IP20 |
| Power consumption: | 3 W |
| Rated supply voltage for DC: | 24 V |
| Number of input ranges 0 mA ... 20 mA: | 1 |
| Galvanic isolation between supply voltage and all other circuits: | yes |
| Number of output ranges 2 V ... 10 V: | 1 |
| Galvanic isolation between input and output: | yes |
| Number of input ranges 4 mA ... 20 mA: | 1 |
| Number of output ranges 0 V ... 10 V: | 1 |
| Operating temperature: | 60 °C |
| Galvanic isolation between the inputs: | yes |
| Design of the electrical connection: | screw connection |
| Fault signal output: | no |
| SIL according to IEC 61508: | without |
