Simplifies your work: Quick one-handed testing of mains sockets thanks to 19 mm contact spacing. Simplifies your work: An integrated flashlight function ensures optimal lighting conditions. Meets your requirements: Checking the residual current device tripping using two load buttons. Dimensions: 240 x 75 x 30 mm Application: To determine whether there is no voltage. Application: For standard-compliant voltage testing, continuity testing and rotary field testing including residual current device tripping. Standards: CAT II 1,000V / CAT IV 600V Safety rule: Determine whether there is no voltage! The voltage and continuity tester from Wiha is your ideal daily companion to easily check this requirement of the safety rule and to support you with a wide range of requirements in your everyday work. It enables voltage testing in the comfortable measuring range from 12 to 1,000 V AC or 1,500 V DC. In addition, it offers the option of continuity testing, optical rotary field testing, single-pole testing and automatic polarity detection. The measurement results are easy to read thanks to an LED display. An additional signal tone signals the flow of current during the continuity test. In addition, the test on sockets can be carried out comfortably with one hand using the integrated spacer. In addition, thanks to the integrated flashlight function, the Wiha voltage tester offers optimal lighting conditions, even in poorly lit work environments. Simultaneously pressing the buttons on both handles of the test probes enables the function of the residual current device to be tested by connecting a load. In accordance with the measurement categories CAT III up to 1,000 V and CAT IV up to 600 V, the Wiha voltage and continuity tester offers maximum safety for work in the area of building installations and directly at low-voltage installation sources. For electrical applications IEC 61243-3:2014, IP64, CE.
| Property | Value |
| Type: | Measuring device |
| Color: | red/yellow |
| EAN: | 4010995452162 |
| Manufacturer no.: | SB25516 |
| Intended use: | For voltage testing, continuity testing and rotary field testing, including residual current circuit breaker activation |
| Operating mode: | Battery operation |
| Operation: | Quick one-handed testing of mains sockets thanks to 19mm contact spacing, continuity test: LED and acoustic tone |
| Display: | LED ELV display >, 50 VAC, >, 120 V DC |
| Illumination: | Integrated LED flashlight |
| Measurement category: | CAT IV |
| Measuring range: | Direct voltage, from 12 V to 1,500 V |
| Safety: | Protection class IP 64 |
| Operating temperature range: | From -15 °C to 50 °C |
| Feature: | FI test |
| Further information: | Single-pole phase test 100 - 700 V AC, rotating field test 170 - 1,000 V phase to phase, continuity test measuring range 0 - 500 kΩ + 50% |
| Accessories: | available, 2x AAA batteries |
| Dimensions: | General, width: 75 mm x height: 30 mm x depth/length: 240 mm |
