Maico 0084.0153 Single-pipe ventilation system ER-AP 60 G

Version with base load circuit: The device runs continuously at 35 m3/h. The full load level can be switched on/off using a light switch or a separate switch. Circuit variant: The base load can be switched on or off using an additional switch (see circuit diagrams on the Internet). Speed cannot be controlled. Surface-mounted fan with ISO Coarse > 30% (G2) filter for ventilating kitchens, bathrooms or toilets. Plastic exhaust nozzle DN 75/80 with automatic plastic non-return valve. Plastic non-return valve also serves as a cold smoke flap. Housing can be rotated, allowing the exhaust nozzle to be connected to the main line at the top left or top right. Filter can be changed easily without tools. The fan can be installed quickly and easily in the housing using the snap-on fastening and the electrical plug connection. Color: traffic white, similar to RAL 9016. All MAICO ER devices comply with protection class IP X5 and can therefore be installed in area 1 according to DIN0100-701, even with water jets. For details see planning information. Protection class II. The extremely steep characteristic curve shows the high pressure capacity of the ER fans. Robust energy-saving capacitor motor. Motor with thermal overload protection. Maintenance-free, with ball bearings closed on both sides. Volume flow characteristic curve and leakage air rate tested by TÜV Bayern eV. Leakage air volume flow < 0.01 m3/h. Shaft level difference in accordance with DIN 4109, tested by IAB Oberursel. With VDE mark. Article: ER-AP 60 G, design: base load circuit, flow rate: 35 m3/h / 61 m3/h, speed: 900 1/min / 1250 1/min, air direction: ventilation, speed controllable: no, SEC average: -3.62 kWh/(m2*a), rated voltage: 230 V, mains frequency: 50 Hz, power consumption: 11 W / 21 W, IMax: 0.13 A / 0.17 A, protection class: IP X5, mains cable: 5 / 1.5 mm2, installation location: wall / ceiling, installation type: surface-mounted, system type: decentralized, material: plastic, color: traffic white, similar to RAL 9016, weight: 1.94 kg, weight with packaging: 2.5 kg, filter class: ISO Coarse > 30% (G2), fire protection: no, connection diameter: 75 mm / 80 mm, width: 236 mm, height: 236 mm, depth: 217.5 mm, width with packaging: 255 mm, height with packaging: 255 mm, depth with packaging: 335 mm, conveying medium temperature at IMax: 40 °C, sound pressure level: 33 dB(A) / 40 dB(A) / specification according to DIN 18017-3 with an equivalent absorption area AL = 10 m2, approval number: Z-51.1-42, nominal width: 75 mm / 80 mm