Maico 0087.0202 Axial roof fan EZD 25/2 B

Brief description: Housing, base plate, inlet nozzle and rain protection hood made of galvanized sheet steel. Galvanized protective grille on the outlet side, contact protection in accordance with DIN EN ISO 13857. Stable transport eyes enable transport by crane. 8-blade impeller made of glass fiber reinforced polyamide. Thermal overload protection as standard. Fans meet the requirements of the European Ecodesign Regulation (EC) No. 327/2011 Directive 2009/125/EC. Vibration-free operation thanks to dynamically balanced impeller and motor (shaft-rotor), in accordance with quality level 6.3, DIN ISO 1940, Part 1. High ventilation-side efficiency, low operating noise. Increased durability thanks to high-quality materials such as low-noise ball bearings. Fans are maintenance-free. Reversible operation of the fans possible. Customer-specific special voltages available as special versions on request and for an additional charge. Can be switched to ventilation or exhaust ventilation with a separate switch (except EZD...E). Air flow direction: The air flow direction is marked. Standard exhaust air operation, air flow direction blowing over the motor. AC motor: Asynchronous motor. Rated voltage 230 V, 50 Hz. Fans ...B and ...D: Capacitor motors with operating capacitor in the terminal box. Fans ...E: Shaded pole motors. Protection class EZD...D and ...E IP 54. Protection class EZD...B IP 55. Speed controllable. Devices can be continuously controlled with an optional speed controller or they can be switched in stages with an optional 5-stage transformer. Reversible. Exception: For fans with shaded pole motors (...E). Reverse operation: The volume flow is reduced by approx. 35% if the air flow direction is abnormal. Thermal overload protection as standard. Electrical connection: Connection cable, approx. 1.7 m long. Safety instructions: The fan may only be put into operation if the impeller is protected against contact in accordance with DIN EN ISO 13857, e.g. with a Maico protective grille SG. Proper permanent installation with a horizontal mounting position, permanently laid electrical supply line and correct air routing via a shaft or pipe is mandatory. Article: EZD 25/2 B, delivery volume: 1900 m3/h, delivery volumeNominal: 1290 m3/h / in opt. efficiency, pressure pfs, nominal: 112 Pa - in opt. efficiency, speed nNominal: 2930 1/min - in opt. efficiency, speed: 2954 1/min, impeller type: axial, speed controllable: yes, reversible: yes, voltage type: alternating current, rated voltage: 230 V, mains frequency: 50 Hz, rated power: 180 W / in opt. Efficiency, INom: 1 A / in opt. Efficiency, IMax: 1.3 A, Protection class: IP 55, Thermal class: F, Installation location: roof, Installation position: vertical, Material: galvanized sheet steel, Color: silver, Weight: 16.87 kg, Weight with packaging: 19.24 kg, Nominal width: 250 mm, Width: 570 mm, Height: 570 mm, Depth: 325 mm, Width with packaging: 615 mm, Height with packaging: 615 mm, Depth with packaging: 375 mm, Conveyor temperature at nominal current: -20 °C to 60 °C, Conveyor temperature at IMax: -20 °C to 60 °C, Overall efficiency e: 29.2%, Measurement category: C, Efficiency category: static, Efficiency level N: 40.2, Year of manufacture: see type plate, Manufacturer name / Official registration number / Manufacturer's place of business: Maico Elektroapparate-Fabrik GmbH / Register court Freiburg, HRB 601233 / Villingen-Schwenningen, PBEP / delivery volumeBEP / Pfs, BEP: 0, 185 kW / 1570 m3/h / 124 Pa, nBEP: 2920 1/min, specific ratio: approx. 1, Information on dismantling and disposal: see assembly instructions, Information on installation, operation and maintenance: see assembly instructions, Items used in the efficiency measurement that are not described by the measurement category: Determination of energy efficiency without protective grille and D